|
| |
   
|
This series
Ferguson drain ditcher includes features that
will make it the leader in drain ditchers for years to come. Features
include: Tapered roller bearing on all shafts; RC 120 U.S.A. - made roller
chain sealed and running in special heat-resistant lubricant; bottom shaft
seal protection plate; cone-shaped cutting head; external chain adjustment;
heavy duty one-piece welded tubular frame. |
Model #B-8-54C
18" Diameter Head, 540 RPM |
BUILT TOUGH FOR THE DEMANDING
GROWER!
|
|
Heavy-duty cone head with hard-faced ⅜" thick blades provides even flow of
soil and the curved depths slide keeps ditches clean, allowing for good
field drainage. |
A MODEL FOR EVERY JOB
540 OR 1000 RPM PTO SPEEDS
|
The
Ferguson power take-off driven ditchers are designed to provide clean
and uniform ditches in widths of 12" and 18" at depths to 12". The
Ferguson drain ditchers adapt to all 3-pt. lift tractors in the 35 and
up horsepower range. These drain ditchers allow you to cut clean
ditches with no mounds of soil to block free passages of excess water
because the delivery chutes are designed to spread the soil over an area 10
feet to 20 feet from ditcher. Recommended in all type field
conditions, bedded or flat, where water drainage is desired. |
Model #B-10-54C
18" Diameter Head, 540 RPM |
|
*Shear plate safety shown without safety
shield for illustration only. Never operate machine without safety shield.
|
Shear Plate
Safety*. This
safety is designed with two
machined plates. One is attached to the input shaft of the ditcher and
the other is welded to the end yoke of the universal joint. The two
plates are then bolted together with shear bolts. When an embedded
object is struck, the bolts will shear and the shear plate attached to the
universal joint will spin independent of the input shaft. The
universal joint is held on by retaining bolt. |
|
|
 |
SEALED BEARINGS |
|
RUGGED CONSTRUCTION |
|
RC-120 ROLLER CHAIN DRIVE |
|
SHEAR PLATE PROTECTION
|
|
51-18-54 Ferguson Drain Ditcher with deflector shield used by strawberry
growers to maintain beds and move uniform flow of soil from middles to tops
of row. Amount of soil regulated by depth of cut and forward speed.
Deflector shields are adjustable to maintain uniform distribution of soil on
top of bed. |
|
|
Website by: